Sign Up Login
As an Amazon Associate I earn from qualifying purchases. I get commissions for purchases made through affiliate links on this page.
magicskywhale
@magicskywhale
Purchases That Improved My Life
5bc99101f95e79f6e7caa9cad57d5d1f08dd847907df917776c317b052ba50a28167ae2bc9c83179e48fa542135cd.jpg
b7196f6ccdead5359592e7cebe078aecc13ca87d230a3c785d3507247d7ad0418ef57d738f04a322a40435c0f2ce8.jpg
dfc0c977fd59981bd7449336ba3407cb1217d9e8f672ca1e93cc573ca030e04e8768085729d2e1dff264a12a341f9.jpg
fb8d35efc52ebe87f6587487657ac9b5872aa53db2045c572505411a045833ab929f98d136e109a56b1686ebeb4bd.jpg
8d0bc381b2e381bfa0672146218aa4313eb551bf69af8a7ba1276186331f57028c657b8f52b07516b8c0535ce861e.jpg
816a37f37ed13e0934de532f082518d562182bd52484456dd0602a579dfa8a2e27306bbc52b1dcad7963de63b22fe.jpg
Snowpeak Titanium Double Walled Insulated Titanium Cup
magicskywhale
I love using this cup to keep water cold and to keep the cup from sweating
I was in university and I saved up some money. I would walk over to a nearby store and buy a loaf of bread, some meats, vegetables, and sandwich bags to make sandwiches. I would wash my hands and then prepare the ingredients and make the sandwiches and place each one in a sandwich bag and then place them into a larger bag. I would take this bag with me and walk around the city looking for people sitting on the sidewalk. I would bring along juice boxes too to give out. The juice boxes came in really handy especially when it was hot. They helped people stay cool and hydrated and it was also extra calories.

Years later, I was walking along a sidewalk on a somewhat quieter street before heading to a busier street in the city to run an errand. There was a man sitting on the sidewalk outside of the emerg at the hospital. He looked alert and lucid, but his clothes looked like they hadn't been laundered in a while and his face looked a little dirty. I went to complete my errand and headed back. All I remember was how hot it was. It was a really nice and sunny day, but it was very hot. I went inside the hospital and grabbed an icy caffeinated drink. Then I went around to the emerg and found the man still sitting outside of the hospital on the sidewalk with his back on the hospital wall. "How's your day sir?" I asked. He smiled and told me, "It's good." I handed the drink to him with a straw and said, I bought this for you." I handed the drink to him and he happily accepted it.

Whenever I am out doing anything in warm weather, I get hot and sweaty. I love having a nice cool drink whenever I am finished doing any of my activities outdoors, like hiking or mowing the lawn. One of the things I don't like is when I pour out a cold drink of juice or water and the outer part of the cup sweats developing condensation due to temperature difference. One of the reasons why I love this cup is because it is double walled, so it prevents the cup from sweating.

Sometimes, when you use a stainless steel container for things, it can leave a bit of a metallic taste, especially if you have tea or juice. It is one of the reasons I decided on titanium because it is pretty inert and doesn't leave any metallic taste in your beverage. I hadn't heard about Snowpeak before, but I like the name and decided on it. It seems like a great brand and the cup was made in Japan. Oftentimes, I don't drink enough liquids throughout the day. I like having this nice cup with water in it next to my desk. Sometimes, I forget to drink and the water still stays pretty cool. If I need it cooler, I would have ice in it and it stays cool for quite long. I could use a standard mug or cup and the water will lose its coolness quite quickly.
4fca15fddae648057c14b42eac8b67fb6e62a9114b279e3d08fbab8c1e5b5f717b446774ca0b8a594ccda201d7928.jpg
1fee6ac0719a296f58ec881c032b0a66ffed5dcce3ff57f5262ec7b04aef19302bb3ac3c45dadda08d4bad110ae03.jpg
78b48f19ec4ae1b9d71123c95547ec4e368752305b27ef21f77afac8fa7d62c20c26fd487ec4c542af2338e806e7b.jpg
d7477a3c1f33df0f3c31d21ca6d2b1bf916af3f1b80725487c2f814ee59f18fe3f283362dbed7daa7326b0046060e.jpg
133e31fe35ee82bbca20069e6d8f72921de095839a0ab8f866e505fd7a3d345e2010fb9a271ca7645e6e7ad6025a1.jpg
b0660b7cb4be9d71e62f5c65057a5e2dbbfceba23b36819576ce0657410b4ac22a96d970117cf7ae7696861baa1a2.jpg
7fae4a66f37d734a91081545793c4d7d3c492084b7ab95a8b40aa5fb4551a0e352bd1296ab88f299d2e045c16ca4f.jpg
d9c554039633845aeca3ca26f6d05532f1090b1beea1b5231562c3c95e16fdafa472a9c5b4b71977ff6f13a770abb.jpg
Peak Essentials Tung Tongue Brush Tongue Scraper
magicskywhale
One of the most useful things to use to have fresh breath
I was out riding my bike when I was heading to a doctor's appointment. I wasn't late, but would be on time or a tad early if I kept going at the pace I was going. I was riding along in the bike lane when suddenly the bike started wobbling, it felt like the front tire was loose from the rim. I stopped and put my foot on the curb and sure enough I had a flat tire. I was using Schwalbe Big Apples. I loved those tires, but they didn't have the highest rating for puncture resistance.

There wasn't much I could do at that point. Luckily, I was already most of the way to the doctor's office, so I found a bike lock ring and locked my bike. I was on foot and hoofed it to the doctor's office and made it there about 2 minutes late. The doctor ordered some tests that would be booked at a later date, then I walked back at a slower pace to my bike. On the way, I stopped by a bike shop and picked up some generic bicycle tubes and a repair kit with tire levers. The brand started with an A, but I usually stick with Contis. Months prior, I had signed up and taken some community courses on bike repair and bike maintenance, so I would be able to handle a tube replacement. I had a bicycle hand pump in my backpack and went to go unlock and retrieve my bike.

I found my bike, still intact and unlocked it. I took it over to a street corner near a church. At that corner there was a half wall made of brick that was meant for people to sit on while they waited for the bus or just wanted to rest on the corner for a bit. I sat and prepared my bike. I took off the front wheel and started work on the tire with the tire levers. I wasn't in the best area of the city, but it was still mostly safe, and it was still daylight out. I could sense some people eyeing me up from around me. Then an unkempt man sat next to me and started chatting with me about bicycles. I usually don't talk to these types of people, but I wouldn't be going anywhere for awhile as I had to fix my bike. I humored him and was pleasant.

The man was missing some teeth and his other teeth were dirty and he had a bit of an odor on his breath. He mentioned that he also had a bike. He had crashed it some years back. He was riding down a steep hill and he lost control of his bike and he ended up crashing into the back of a bus and wrecked his teeth. He said he thought it was amazing that I can do my own work on my bike. I said thanks. He was retired and kinda just cruising through life now since his wife died. He didn't want money from me, he just wanted to have a pleasant conversation with another human being because people like him generally get ignored by the general public, except for those in his network. He appreciated that I was willing to have a conversation with him.

This was one instance when I was a bit more aware of breath. There was another time when the situation was kinda reversed. I was working with some medical residents one time. I met them and we introduced ourselves. Immediately, one of them pulls out some gum and starts chewing. She gave gum to her friends and offered a piece to me. I realized some years afterwards that she wasn't trying to be nice by offering gum, she was trying to be nice by offering gum to help freshen my breath in case I had other meetings with other people that day. My breath wasn't the greatest even though I brushed my teeth before going out.

For awhile afterwards, I began using a tongue scraper. It was one of those cheap kinds made of plastic. Either it was poorly made or I was just a little too concerned about my bad breath and was scraping too hard, my tongue was red and kinda bloody. Later, I started using one made of stainless steel and it seemed to work okay, I was scraping a lot of gunk off of my tongue and it did seem like my breath was a lot better. I would brush my teeth and use mouthwash, but it felt a whole lot cleaner and fresher when I used a tongue scraper.

I didn't think that it would be possible for there to be a gamechanger to a gamechanger. I ended up switching from a plastic tongue scraper to one made of stainless steel to a plastic tongue brush. I first thought what was the point, couldn't I just use a toothbrush instead. I thought that that would make more sense until I actually used one.

The tongue brush is totally different from a toothbrush. The toothbrush just won't do as a replacement to a tongue brush. I used it and was able to get more of the gunk off my tongue and it seemed to irritate my tongue less and I was able to get into more of the cracks and crevices of my tongue. My steel tongue scraper was made in the USA and so was this tongue brush. For me, the tongue brush worked so much better than the steel tongue scraper. This tongue brush has a nice feel to it and feels really well made. You probably don't need to replace it as often as a regular toothbrush, but it would still need to be replaced eventually.

It has improved my life by helping me have fresher breath and keeping my tongue clean. I normally use it after brushing my teeth and I use it with mouth wash. Sometimes, you have some sort of sugar alcohol based tongue paste/gel, but I don't think that that is necessary. Just brushing your teeth, using a tongue brush and using mouthwash is plenty and works great.
e50ee6290fcfe1c44f8ede803374a1fbb3770cb849b832add929ae639531b425f326d0158a811e1c8c8950cfaa09e.jpg
805b4d7f4dd6e80395fd627826e159aa3133bd7cde284c2da7e18bae3aad004e0153ede12edf8b591cd74187571c0.jpg
075e85ec06c8741f28cc5d700739473192377bf60b92fe4fffb551e3451b4f747d7f5a9a1b0560e4a8359e442aaa8.jpg
3M Command Hanging Strips Small
Thick Mouse Pad High-Density Polyethylene (HDPE)
magicskywhale
Comfortable Mouse Pad That Allows Me To Move My Mouse Effortlessly Over It
I had finished university and had gotten my first real job. I was working at a hospital and was doing basic administrative work. I would use a computer at work and it had one of the fabric and foam style mouse pads. It would have a wired mouse using a ball actuator to register the x and y coordinates. The fabric was necessary for the ball to have traction. I actually had a similar style mouse pad at home. I didn't really want to be reminded of work so I had bought another type of mouse pad. When I was at home, I would use the computer to play video games to unwind. The work was stressful and being at home and not doing anything but play video games was helpful at dealing with the stress.

I used to use a thin mouse pad. It was the type that you would place on your desk and push down firmly and it would stay in place. I would use it for working and gaming and then the mouse pad would no longer stick to the desk. So as I was moving the mouse around, it would move the mouse pad around as well and this meant that the cursor wasn't moving properly and it would be very distracting.

I eventually switched to a cutting board type mouse pad made from high-density polyethylene (HDPE). I loved this mouse pad. HDPE is used in many products including products for food storage. With this mouse pad, I could glide my mouse along it easily and it provided a fairly slick surface with just enough traction on it. It worked great for doing office work or gaming. It was a game changer for me and I didn't think I could ever go back to traditional mouse pads.

I had previously purchased something called an ultra-high molecular weight polyethylene (UHMW PE) board. It was 12" x 12" which was great and I thought it would work, but it was not good at all. It had a nice texture to glide the hands or fingers along, but it didn't work well for a mouse. The edges were also very sharp. I found another supplier who would make custom HDPE boards, but these were the type used for indoor skating rinks and it didn't work well as a mousing surface since there was too much drag. I finally found that the best surface would be from a cutting board made from HDPE. The previous one I had one was from a reputable company. The dimensions were okay, but it caused pain in my forearm near my wrist because of the dimensions. It was a 15" x 12" x 1" cutting board. I loved the look of it, but it was heavy and caused a pinch point on my forearm. I loved it, but it had to go.

Finally, I ended up getting a custom board made which was 10" x 10" and it was 0.50" thick. It had rounded corners and all the edges were eased so that I wouldn't cut myself on the edges while running my finger along them or moving my wrists over them when mousing. It worked out surprisingly well. There was an option to get the edges cut or routered for a bullnose shape. I didn't opt for that. In retrospect, I would have purchased that extra option as it would have made the mouse pad cooler looking and reduce the sharpness about the edges even more so. My mouse glided along smoothly and effortlessly and the laser mouse tracked very well on the surface. The HDPE cutting board also provided just enough resistance or drag to make the mousing experience really comfortable. It was a game-changer for me and I don't think I could ever use any other type of mouse pad again. I used 3M Command hanging strips to keep the mouse in place on my desk. I went with the Cutting Board Company (Atlanta, Georgia).
9a154685dc531a9aed0df37d7ed3da58ae3c31732a74eccb58da2beb1f57a86421841f9f442b9a905eb4c4eed426b.jpg
47b1e209efbeb80d33a9c1816c574a9b1e83be1f61ef79e8671f1adc56d8cf29b60db32a0e5fffdd159391df960cf.jpg
a53372d907cfd20bd26f244e39af72f310aedc4b3fd39f5ae4ebe6eb03c088bf641538d0f91260624fecf7ee9b805.jpg
9b0991627bb116e28ef8d8fef747e80a103603eee4ea937e52fd76948dafeef251120e16f9e96bdec23f23885084e.jpg
0688f15563db27bb7e855a98b2df50a6ccb1963660824a477a815ebc461b730a394b498d986889cd2f53c0dd16c55.jpg
9f9b32107f4a7b96b9886247355d16199b7e2d191cb884dd73d80053ac91fef782b17ab5c35b84ee49f7792b097e9.jpg
bbc2206f2b3c0fa027678b440b36609d16b92d007529e7836057bba18445f4eff1e97d2983e26bbc171f5664ad61d.jpg
8e9505098e2bb64bf0cb18266d7582193b8a9dacfa02dd8f0207845bed05ba7e930cc81616c2b058d282b4d73cc0a.jpg
3M Command Hanging Strips Small
Wrist Rest for Keyboard, High-Density Polyethylene (HDPE)
magicskywhale
Stops Pain and Irritation in the Wrists and Forearms from Using a Keyboard
My buddy and I were friends since grade school. We went to high school and were still friends. We didn't like much of our classes when we were in school. For the first two years, the only classes we were interested in were the computer and keyboarding classes. We had these large keyboards that had the main typing keys and then a bunch of other function buttons on the left side, along the top, and a number pad on the right-hand side. They were very clickety and very loud. It was a keyboarding class where the teacher was teaching us how to use the keyboard with proper finger positioning.

After keyboarding class, we would have lunch and we would sit in the cafeteria and eat with our other friends. Sometimes, we would each grab a burger or a pizza slice from the cafeteria or we would bring our own lunch. A girl from my keyboarding class who I wasn't quite friends with approached me. I had bought a burger that day. She asked if she could take a bite since she was hungry and didn't have any money. I was caught off guard a bit, thinking this was probably a dare or a prank. My friends all turned and looked at me and I managed to stammer out, "Yeah, yeah, sure." Before I could even finish speaking, my hands had already ripped the burger in half and my arm was outstretched handing the half burger to her. She thanked me and took the half burger and sat down in front of me on the other side of the table and ate it as we chatted for a bit. I gave her some of my drink well. Over time, my friends and I eventually went our separate ways as we went off to various colleges and universities and the keyboard was still integral to our schooling and work.

As the years passed, I would be doing a lot of work on keyboards. I would work at my desk and use my keyboard to write an essay, or a report, or to do some data entry and after awhile my wrists would start burning. Sometimes, there would be tingling along my forearms and along my fingers. The angle of my wrists when using a keyboard would mean that my wrists and forearms were placed at the sharp part of the desk. It would cause strain on my wrists and fingers and put pressure on my wrist and forearm area. I would try to fold up a small piece of cloth or a towel and use it as a makeshift wrist rest, but it wasn't ideal.

I liked using this wrist rest at 16" x 3" x 0.75". It was a hard plastic, made of high-density polyethylene (HDPE) which was used in cutting boards, but still did its job very well and it was still very comfortable. I would normally have my wrists resting on the top of the wood desk. It would feel to be about the same hardness, but it was much more comfortable typing and using the keyboard with the wrist rest than without.

The problem I had with it was that it slid around. It was very important to keep in one place because it just won't work with it sliding around and it could be very distracting. So what I did was I attached four pairs of the 3M Command hanging strips and used them to fasten the wrist rest to the desk and it stayed firmly in place. Before I put the fasteners in place, I would place the wrist rest on my desk and type for a bit and shift the wrist rest around until I found the perfect spot for it. Then I would place the fasteners on and set them in place. They finished curing after 24h and they would be good to go and lasted years.

Other options would be to use a wooden wrist rest from a Japanese company called Filco where the wrist rests were made in Japan. These were excellent, but not my favorite. Aside from that, another option may be any of the gel versions that have a vinyl cover or a fabric cover or anything that had foam. I much preferred the HDPE wrist rest. I just loved the look of it and it was thicker than the offerings from Filco. Don't get me wrong, I still loved my Filcos. I loved the HDPE wrist rest and I actually preferred the feel of it over gel or the wood versions from Filco. I liked the wrist rest at a 0.75" thickness and I felt that 0.50" would also have worked. I liked the texture of the HDPE material over any of the other materials. Because it was made of HDPE, it was chemically resistant, so it had a soft glide sensation over its surface which added to the comfort when typing for a long period of time. I bought the wrist rest from the Cutting Board Company (Atlanta, Georgia).
b6dcfea609a0d63c2e57eb4c43b91b62a904f81e24d290dcfb9d72f0562d6890d6a423870f3dd390feb1bedc2f502.jpg
16537951c87dcd5fade8aa348316654c3b40321e149003c2292b291af7adf7f0f67696b1a79f0b5f135c0a24ce54d.jpg
847835e7b5d49214f129e29dc15806909b49d95bd0c955a5e975f895326cdd5e26d9d5f24862b08c374032285772b.jpg
639b0f77b7a167de77cfe4b28e0b64b58fb451b6534c1080fe3a396d6986af343171bff3e45d8cc495d43eaae71a1.jpg
d0833ee510051cf064f63b2dce06e9bb20557952938b0f349612d16d74aabefc9b6996cb9a3e510ca2ef84a70f2d0.jpg
Asimeto Engineer Machinist Square Stainless Steel with Bevel Edges
magicskywhale
A Cool Paperweight to Keep Pages on my Desk and to Separate Projects
When I was young, my mother took us kids on a plane trip overseas for a vacation. We arrived after a long flight and stayed with family. We saw various sights and visited many attractions and went to many different restaurants and sampled the local cuisine. It was a fun and exciting journey and I got to spend time with my mom. It was much hotter than being at home and quite a bit sunnier, but we eventually got used to it. It was nice meeting other family members for the first time. Love was a beacon coming from another part of the world.

Before we knew it, several weeks had already passed and we had settled into a routine for our day-to-day that felt so natural that we were basically living in a home away from home. It was time for us to head back to our true home. We had picked out some things to take as souvenirs for our trip home. My mother bought me a pear sculpture made of crystal. It looked like it was clear glass and it had neutral coloring and it had bubbles inside it to add some texture. It was flat at the bottom so that it could stand upright and was about the size of my hand. I thought it was a cool piece of artwork, so I kept it as a paperweight.

Years later, I worked on some projects that required various tools and measuring devices. I would work with measuring devices called squares that helped with ensuring that two parts were perpendicular to each other. I liked this particular device because it was one single piece with nothing else added or attached to it.

I bought the Asimeto Machinist/Engineer Square with a 4-inch blade (639-23-0). I liked having this square because it was very well-made. It had a DIN 875 standard at precision 00 (zero-zero) which had the lowest maximum variation for perpendicularity compared with the other precision levels. The tolerance levels were into the microns. I liked this aspect of the square and the fact that it referenced a standard of tolerance for deviation or variance and to me this meant that it was much more special when it was used as a paperweight.

It had improved my life by serving as a high-quality and unique paperweight. Most things that are around the size of one's palm with a bit of heft to it could serve as a paperweight. I liked using this as a paperweight because it was not just some generic weighted object, but it had an alternate purpose to it as well. It could be used to check something for squareness or perpendicularity. Everytime I looked at it I was reminded that it wasn't merely a paperweight, but it was something that was built to a high-level of precision down to the micron. I also liked the look of it, it was different from other machinest/engineer squares because one length, the blade edge, had beveled edges at the outer edge and inner edge. Also, most squares were made of regular or hardened steel. This one was made of stainless steel so that it was more resistant to rust and corrosion. While it sat on my desk as a paperweight, it wouldn't rust or corrode. It also wouldn't crack or shatter if dropped or knocked off my desk accidentally like a glass or crystal paperweight would. You can see other machinist squares with a lot of use and they have a corroded surface from use. This Asimeto square will continue to look like a nice and beautiful piece free from corrosion over time because it was made of stainless steel.

Because it was a couple of millimeters thick, it can lay mostly flat. It was different from a glass pear sculpture paperweight in that it could serve as a paperweight, but with the additional ability to allow someone to stack additional papers ontop of it if needed. This meant that you could use it as a page divider with pages laying flat if you were working on various projects. Some pages that belonged to another project or file you were working on could be held down by the paperweight and then other pages belonging to other projects or files could be placed on top thereby separating the projects.

Overall, I am glad that I bought this Asimeto Machinist/Engineer Square. I have it on my desk everyday and it is useful to me to keep paper and pages on my desk where they are less likely to be pushed off or blown off my desk. It is a nicely made product that makes my desk a little nicer and a bit cooler as a result of having it there. This square belongs to the 639 series and comes in larger and smaller sizes. I like the 4-inch version, but I feel that the one that is one step up in size would be good too.
7167995b1fe12257570d6ebf76beb6fc7718bd32d36ba9225cb3749ce7bb57140c9124560b09982819f59b24619d6.jpg
870cedb8e1e7298a4c57edda82133f09dc2c85e2c4bce55876d8b108bb473dfd10582a3bd6f5ab1918ad97078d0d9.jpg
ff0af985f9eba138de93fe9630fd62eb18e411bc462a4f4536619d5e0d2b6891d5ee3eeee3a0afc026fefc0d51b9e.jpg
14506e15d1eaed7314274f599919b97503c3839c762311f3bcc9af6a6c939335ebf587f3a11b49a2b390baf885689.jpg
0ce1c35d8108886b6f69d5e1bb8184aa441ebaae0c067c9d2bff5af1994c862a108413d2cabbfd48c8a5d427d9558.jpg
Ohuhu Ocean Wave Night Light Projector
magicskywhale
Soothing and Relaxing Lamp That Generates Ripples and Wave-like Patterns Like a Lake or Ocean
When we were young, my mother would work a lot. She would work a lot of hours each day and and she would rarely take a day off. She did whatever she could to help provide for our family. It would always be a wonderful experience whenever our mother had time to spend with us, between working heavy hours and running errands. We would help out whenever we could, but we were still quite young.

One time, our mother took us out for a drive. We stopped by a convenience store to pick up some food and we headed further south towards the lake. Our mother took us to an area where there were ducks and we brought the food over and we threw the food out onto the water for the ducks to get. The ducks would make some ripples and some splashes in the water when they went to get the food. We went to another area where there were Canadian Geese and we fed them as well.

Afterwards, we went out to a modest restaurant in the area. We had all sat down to eat and I remembered it was very warm out, but the restaurant was air-conditioned so it was a nice feeling walking into a cold building from being outside in the hot weather. We had a nice meal and then went home.

The lake and the area near the lake changed. There was more construction and the city built a multi-use path and a boardwalk near the lake. Years later, it would be my wife and I visiting the lake. We didn't feed the ducks, but we would just walk around the multi-use path and the boardwalk by the water. We had visited during the summer when it was really hot and also when it was cooler. It was nice to be near the water.

I love this Ohuhu LED projector. I would have it on the nightstand next to the bed and have it run. It generates audio effects like crickets or seagulls on the ocean. I prefer using it with the sound effects off and using the full-mode for the color setting which is all the colors running simultaneously. Sometimes, I like to use just the blue and red setting.

This projector/lamp has improved my life because it provides a soothing sensation kinda like if I was on the water. I have it pointing up towards the ceiling and I can just lay in bed and look up at the ripple and wave light pattern that this projector generates, but with the room lights turned off. My mind sometimes drifts away and I feel relaxed and a lot of my stresses and worries melt away.
a8254a72168d14bba8a00491a8800e8e01b7a75c1c0e68008a0a72d9091d8c57f7da6d4d50b9dcad7ad8770804741.jpg
08f2e9c6f266ec65cde5f3741d5679615ae080c7ae278cf57c55574be81f6e3e517b84c28b90e9d852ca0b8e45d7c.jpg
d9f0dd5d576429cda0d85f9f4c76cf9f0e1ab431f3aada0aab28c7c2b0a972ed42fa7aba869240985ccb4d181737b.jpg
2bc65afae2d0203203fd4382125091800b94cb4b1ee0bf13cabc5ea982ae9a516e353c6aac728217d1783f73b565f.jpg
1b6712573a46b9a8e24c37d656a10d2928bd640b24c6026ad403d55342858ee218524cc1323088b4501947d280c09.jpg
507bda0012d06ec4dc5bfbd8aa751078ba8840563c9adc8303cb28bf243cb591bdd4d7e2c556969c0bdef07d969fe.jpg
cbcf573358846ed46613370e47f248a4a4757d0dd0f8c55a4e260a17c3a09daa29ce0f123640056780434af1496d8.jpg
b415af9ef74773f2e74ac354f89e8ee0946455b20f00cce7fa75fabaa1086b7798bc0b889f03e578724dc902d5580.jpg
15895eb7c69721c7722c10122576449d2eaa08cb85cf0843d30455a38fb204a811fe9ee76aea454e8321a87bc5d45.jpg
This has a combined mode showing the blue nebula and green stars.It can show just the blue nebula.It can show just the green stars.
BlissLights Sky Lite, LED Laser Star Projector and Nebula Lamp
magicskywhale
My Own Personal Laser Light Show to Relieve Stress
When I was younger, my brother used to have friends over and they would smoke and party. He would smoke too. I thought he would smoke just to fit in with his friends, but there were many times he would just hang out outside in the backyard and smoke. I didn't like it. I didn't like the smell and I thought it was an unhealthy habit. Despite this, my brother was still more athletic than me.

Our family went out one time to an amusement park a decent drive away, but not too far. We got to the parking lot and went in. There were some water attractions since this place was on the lake. I liked some cool attractions, but they were further at the other end of the park. We walked over to the end and we went to the part with the laser light show. It was really neat. You got to sit down in comfy movie theatre-like seats and you got to see a laser light show with what appeared to be holographic projections. It was all really neat. The show was probably 20 minutes long, but it felt longer and it was amazing the entire time. They had some interesting soothing and entertaining music and musical effects and made the whole experience magical and surreal.

Afterwards, we went into the nearby maze attraction. The maze has multiple parts, kinda like a friendly fun house where you progress through different themes. They would be different mazes made of different materials and joined together so that you progressed through one after the other in sequence. For instance, one part was just walls, painted drywall and then you got to the end of that maze and progressed further into one that was a hedge maze separated by plants/hedges. When you completed that maze, you left into another maze where the maze walls were made of wire, but thick-coated so that people wouldn't get hurt. This was not the same as another part of the amusement park with hanging soft punching bags. This was the maze sequence part. About half of the way in the maze attraction, there would be a darkened maze with low-light. It had really interesting and soothing, but magical music. There would be a smoke maker and there would be lasers pointing to near the ceiling with colorful background lighting. This was my favorite part of the maze. I would stay there for as long as possible whenever my family went to this park. When I finished running through the maze, I can get a score to see how long I took and if I hit the certain checkpoints. I had a card and there would be card readers at various points. I would always seem to miss one or two checkpoints.

Before we left to eat or left the park altogether, we would go on a boat ride. It would be like a roller coaster, but instead of following a metal track it would follow a water path with a plastic waterway filled with water and we would be sitting in a boat running along the watercourse. It was somewhat like a water slide, but the small boat we were in would drift gently along the watercourse. We would seat four to six per boat and go along. There would be decorations and animatronics all along on either side of the watercourse for entertainment and then a part that raises the boat up a path uphill before it comes to flat area and then a downward direction like a roller coaster but all on water. The final splash part is where people raise their arms and scream. I did this ride a few times and I ended up getting a lot of water in my mouth during the drop and splash part.

I went home and shortly afterwards, I kept coughing and coughing. I ended up getting sick and it was most likely from the water I got in my mouth. I kept coughing through the night and for the next few days. My face was red and I was congested and didn't sleep well. I looked like a mess. My brother, whose room was next to mine, kept going to my room to check on me to make sure I was alright. He was still smoking at the time. Then suddenly, he stopped smoking and he stopped inviting friends over. He thought that I was having a reaction to the smoking.

It was a cool trip going to that amusement park and neat that I got sick and my brother quit smoking because of it. I picked up a Blisslights Sky Lite projector and it reminds me a lot of the laser light show I used to go to as a kid at that amusement park and the laser part/new age music part of the maze attraction. The Blisslights Sky Lite projector generates a blue nebula background that you project onto a wall or ceiling with a stars mode which are green stars generated by a lasers. The stars and nebula can be kept stationary or moving slowly by hitting the second button on the projector. There is a third button closed to the floor which you can use to adjust the brightness. You can leave it on to fall asleep to as there is a six hour auto shut-off built into it. You also have the option of showing just the blue nebula background, just the green laser stars, or both turned on simultaneously.

The Blisslights Sky Lite projector improved my life because it creates another form of stress-relief. I can just lay in bed and look at the laser light show and it feels like laying on the grass and looking up at the stars on a clear night. The laser lights can move slowly with the nebula moving kinda like if you were on a planet moving and looking up at the night sky. It kinda makes you forget where you are and you are left with just you and the stars. It's a type of surreal experience that can take you way from your worries and stresses, if only temporarily.
f0754263ddccd1a6fcbf79db9829a276085fc619fd2b7d15f2ca8a1ee4ed0966ed61514368368ad89cfeb08f06d70.jpg
f21c35af40b82981438fd4947ddf165f4d9dfd63c0b6631053d05a9db8fd6f61493ec1ba5189516123ed3eb3a26be.jpg
8c78669e5ef798d89201850cbc481cd455f95022c16c914c6c52adb18c1fa5d1b56abf716f30dab307ea941ff921b.jpg
5766de97063b8ba02dfdaa21fa7f83467a37b2337e5588e1701882e0d9e83ae6d8653889c4ffae5b72a6682675eda.jpg
1935f600cebc7024442d21469f62685c6ae711c3c4699bbc86f33c659a63cbcab8e201600d85aaeca3c9bd7db827c.jpg
7ae5eb5c0dddaa79a05d800ecac2645cc58227b00f5947ab36f3e6576805cac6caee69d95e826e7e8579b79b5c6c7.jpg
d585c957e5e4bff04f1a858badaae6718e3d906d91ef9555dcc8d2c03a455dfcf891a4fec401a858ba3f78881462d.jpg
Lifehammer Window Tool and Seatbelt Cutter
magicskywhale
An Essential Safety Device to Keep In Your Car in Case of Emergency
When growing up, I didn't think my uncle was a mean man. He lived a tough life and really didn't have any handouts, but he had to stay strong to provide for his family. A part of that probably made him seem a little rough around the edges, maybe a little stern, and a bit on the intense side, but he was a decent man. I try to think back, but I never saw the man smile. Despite this, I could tell that there was some kindness to him.

I went away to school and hadn't seen my uncle in some years. At some point, I needed help, it was a tough situation and one in which I didn't feel I could get out of. I asked for help and my uncle came out to help me. It wasn't a lot to sacrifice for him, but it nonetheless was a huge help to me. I was going to be in a world of hurt if it wasn't for my uncle.

Years later, my uncle was dying in a hospital with health complications related to old age and a bad lifestyle. He was frail as he lay in his hospital bed. I sat at a chair by the foot of his bed. I had just come from a job interview. I said goodbye to him and thanked him for helping me when no one else in my family could. He passed away not long after I visited him. Life is fragile and can disappear easily.

I think about this from time to time while in a car. Sometimes, cars can be really sturdy and have lot of safety features. They are not fail-safe and people can still be seriously hurt in a car accident. If there's ever an instance when a person is trapped in the car, but needs to get out, it is important to have the proper tools for safe egress. I always have two of these Lifehammers in the car. I like to keep one in the driver's right arm console and one behind the passenger seat. It is useful in case of an accident and the seat belt mechanism is damaged or won't release the seatbelt. In the event that the car door is damaged, it is useful to break the window to get out of the vehicle.
9caf95ce84361f2d167f7f8c4dc2706e4d290592260a22a0a599dbd5efe7afc87414a89613c68ee0d5207b50b77bc.jpg
cd9e5dd3f2b47fa1e016a190f24f34e7f5ced0e5cd3411cfaf16343fec7d202756c702324aa0ae28c2af761a7dcbf.jpg
3e1ab6759f6f1f8ca76e49ba54069b31976c7f12f802a0ad5bc51e248d5e1670f4cec92524763537025343829484b.jpg
1036e0cf914255de816fa845ef7cce1a28d1a12104ee79dbe12bda151b6963832dc10769ccdac95f6bb2b28850307.jpg
f47262b67c47539c8440e7b8257d45dfb472f32adc85f16dddf8088bd9aede8b9ead62dc65d8deed93adc546504c7.jpg
372644aec9c583695c584d77cea3ad9db390690d878e0e8148ac646d9d5c3ae27833aba064cd659f60bc034497464.jpg
Vornado 133DC Compact Fan with variable speed control
magicskywhale
Prevents Me From Getting Overheated While Working at My Desk
A long time ago, my sister-in-law bought my wife and I some food to eat. We didn't have a lot of money at the time and we were really grateful. Sometimes, the little things could mean so much. We were just happy that we weren't having dry ramen again that night.

Some years later, I had finished my schooling and began working. I worked hard and tried to stay consistent. I wasn't well off, but I was somewhat comfortable at that point.

My sister-in-law was in an abusive relationship. She needed help and reached out to us. We helped her out and got her moved into a new apartment. The apartment was really hot and I had a large fan that had its own stand and it had something like 16 to 20 different fan speeds. It was a nice fan and it had an ultra low mode that could still keep you cool, but without being too strong or too loud. I used to use it for work and kept it near my desk whenever it got a little hot in my room or if I was working while moving around a lot and worked up a sweat. My sister-in-law needed it more and I was happy to give her the fan since she was having issues with her air conditioning.

I eventually picked up a small, personal fan. I bought a Vornado DC133 and I keep it on my desk. Sometimes, I get overheated and need to cool down quickly. This fan has improved my life by allowing me to rapidly cool down whenever I need just by turning the dial. I would normally just turn the fan on by turning the dial a little bit and it would be in low mode which was usually enough. There have only been a few times when I have to turn up the intensity and there is a bit more noise, but the fan is still pretty quiet.
Followers
Following
magicskywhale
Snowpeak Titanium Double Walled Insulated Titanium Cup
I love using this cup to keep water cold and to keep the cup from sweating
30
e59559f34a2e69126dbc1ade030caae0cf4396b3cae9a2da2725b04d13145dd336487c0561bc2cc8c4b84f87b7d97.jpg
7
magicskywhale
snowpeak-titanium-double-walled-insulated-titanium-cup
30
e59559f34a2e69126dbc1ade030caae0cf4396b3cae9a2da2725b04d13145dd336487c0561bc2cc8c4b84f87b7d97.jpg
Snowpeak Titanium Double Walled Insulated Titanium Cup
I was in university and I saved up some money. I would walk over to a nearby store and buy a loaf of bread, some meats, vegetables, and sandwich bags to make sandwiches. I would wash my hands and then prepare the ingredients and make the sandwiches and place each one in a sandwich bag and then place them into a larger bag. I would take this bag with me and walk around the city looking for people sitting on the sidewalk. I would bring along juice boxes too to give out. The juice boxes came in really handy especially when it was hot. They helped people stay cool and hydrated and it was also extra calories. Years later, I was walking along a sidewalk on a somewhat quieter street before heading to a busier street in the city to run an errand. There was a man sitting on the sidewalk outside of the emerg at the hospital. He looked alert and lucid, but his clothes looked like they hadn't been laundered in a while and his face looked a little dirty. I went to complete my errand and headed back. All I remember was how hot it was. It was a really nice and sunny day, but it was very hot. I went inside the hospital and grabbed an icy caffeinated drink. Then I went around to the emerg and found the man still sitting outside of the hospital on the sidewalk with his back on the hospital wall. "How's your day sir?" I asked. He smiled and told me, "It's good." I handed the drink to him with a straw and said, I bought this for you." I handed the drink to him and he happily accepted it. Whenever I am out doing anything in warm weather, I get hot and sweaty. I love having a nice cool drink whenever I am finished doing any of my activities outdoors, like hiking or mowing the lawn. One of the things I don't like is when I pour out a cold drink of juice or water and the outer part of the cup sweats developing condensation due to temperature difference. One of the reasons why I love this cup is because it is double walled, so it prevents the cup from sweating. Sometimes, when you use a stainless steel container for things, it can leave a bit of a metallic taste, especially if you have tea or juice. It is one of the reasons I decided on titanium because it is pretty inert and doesn't leave any metallic taste in your beverage. I hadn't heard about Snowpeak before, but I like the name and decided on it. It seems like a great brand and the cup was made in Japan. Oftentimes, I don't drink enough liquids throughout the day. I like having this nice cup with water in it next to my desk. Sometimes, I forget to drink and the water still stays pretty cool. If I need it cooler, I would have ice in it and it stays cool for quite long. I could use a standard mug or cup and the water will lose its coolness quite quickly.
Peak Essentials Tung Tongue Brush Tongue Scraper
One of the most useful things to use to have fresh breath
31
37c158575be81a568b7b5c98ad804e1f1e6321c70c7d9b559d16e21c60ae94fc82c9c39667794adc12a06c1ad38b9.jpg
9
magicskywhale
peak-essentials-tung-tongue-brush-tongue-scraper
37c158575be81a568b7b5c98ad804e1f1e6321c70c7d9b559d16e21c60ae94fc82c9c39667794adc12a06c1ad38b9.jpg
Peak Essentials Tung Tongue Brush Tongue Scraper
I was out riding my bike when I was heading to a doctor's appointment. I wasn't late, but would be on time or a tad early if I kept going at the pace I was going. I was riding along in the bike lane when suddenly the bike started wobbling, it felt like the front tire was loose from the rim. I stopped and put my foot on the curb and sure enough I had a flat tire. I was using Schwalbe Big Apples. I loved those tires, but they didn't have the highest rating for puncture resistance. There wasn't much I could do at that point. Luckily, I was already most of the way to the doctor's office, so I found a bike lock ring and locked my bike. I was on foot and hoofed it to the doctor's office and made it there about 2 minutes late. The doctor ordered some tests that would be booked at a later date, then I walked back at a slower pace to my bike. On the way, I stopped by a bike shop and picked up some generic bicycle tubes and a repair kit with tire levers. The brand started with an A, but I usually stick with Contis. Months prior, I had signed up and taken some community courses on bike repair and bike maintenance, so I would be able to handle a tube replacement. I had a bicycle hand pump in my backpack and went to go unlock and retrieve my bike. I found my bike, still intact and unlocked it. I took it over to a street corner near a church. At that corner there was a half wall made of brick that was meant for people to sit on while they waited for the bus or just wanted to rest on the corner for a bit. I sat and prepared my bike. I took off the front wheel and started work on the tire with the tire levers. I wasn't in the best area of the city, but it was still mostly safe, and it was still daylight out. I could sense some people eyeing me up from around me. Then an unkempt man sat next to me and started chatting with me about bicycles. I usually don't talk to these types of people, but I wouldn't be going anywhere for awhile as I had to fix my bike. I humored him and was pleasant. The man was missing some teeth and his other teeth were dirty and he had a bit of an odor on his breath. He mentioned that he also had a bike. He had crashed it some years back. He was riding down a steep hill and he lost control of his bike and he ended up crashing into the back of a bus and wrecked his teeth. He said he thought it was amazing that I can do my own work on my bike. I said thanks. He was retired and kinda just cruising through life now since his wife died. He didn't want money from me, he just wanted to have a pleasant conversation with another human being because people like him generally get ignored by the general public, except for those in his network. He appreciated that I was willing to have a conversation with him. This was one instance when I was a bit more aware of breath. There was another time when the situation was kinda reversed. I was working with some medical residents one time. I met them and we introduced ourselves. Immediately, one of them pulls out some gum and starts chewing. She gave gum to her friends and offered a piece to me. I realized some years afterwards that she wasn't trying to be nice by offering gum, she was trying to be nice by offering gum to help freshen my breath in case I had other meetings with other people that day. My breath wasn't the greatest even though I brushed my teeth before going out. For awhile afterwards, I began using a tongue scraper. It was one of those cheap kinds made of plastic. Either it was poorly made or I was just a little too concerned about my bad breath and was scraping too hard, my tongue was red and kinda bloody. Later, I started using one made of stainless steel and it seemed to work okay, I was scraping a lot of gunk off of my tongue and it did seem like my breath was a lot better. I would brush my teeth and use mouthwash, but it felt a whole lot cleaner and fresher when I used a tongue scraper. I didn't think that it would be possible for there to be a gamechanger to a gamechanger. I ended up switching from a plastic tongue scraper to one made of stainless steel to a plastic tongue brush. I first thought what was the point, couldn't I just use a toothbrush instead. I thought that that would make more sense until I actually used one. The tongue brush is totally different from a toothbrush. The toothbrush just won't do as a replacement to a tongue brush. I used it and was able to get more of the gunk off my tongue and it seemed to irritate my tongue less and I was able to get into more of the cracks and crevices of my tongue. My steel tongue scraper was made in the USA and so was this tongue brush. For me, the tongue brush worked so much better than the steel tongue scraper. This tongue brush has a nice feel to it and feels really well made. You probably don't need to replace it as often as a regular toothbrush, but it would still need to be replaced eventually. It has improved my life by helping me have fresher breath and keeping my tongue clean. I normally use it after brushing my teeth and I use it with mouth wash. Sometimes, you have some sort of sugar alcohol based tongue paste/gel, but I don't think that that is necessary. Just brushing your teeth, using a tongue brush and using mouthwash is plenty and works great.
Thick Mouse Pad High-Density Polyethylene (HDPE)
Comfortable Mouse Pad That Allows Me To Move My Mouse Effortlessly Over It
23
270f24eb5a9b7443abc4bab3de66db89f8dad2a24bc413e87480abf5443e7d88f7a5f8b6fe6c0b29ee5d630b9f273.jpg
4
magicskywhale
thick-mouse-pad-high-density-polyethylene-hdpe
270f24eb5a9b7443abc4bab3de66db89f8dad2a24bc413e87480abf5443e7d88f7a5f8b6fe6c0b29ee5d630b9f273.jpg
Thick Mouse Pad High-Density Polyethylene (HDPE)
I had finished university and had gotten my first real job. I was working at a hospital and was doing basic administrative work. I would use a computer at work and it had one of the fabric and foam style mouse pads. It would have a wired mouse using a ball actuator to register the x and y coordinates. The fabric was necessary for the ball to have traction. I actually had a similar style mouse pad at home. I didn't really want to be reminded of work so I had bought another type of mouse pad. When I was at home, I would use the computer to play video games to unwind. The work was stressful and being at home and not doing anything but play video games was helpful at dealing with the stress. I used to use a thin mouse pad. It was the type that you would place on your desk and push down firmly and it would stay in place. I would use it for working and gaming and then the mouse pad would no longer stick to the desk. So as I was moving the mouse around, it would move the mouse pad around as well and this meant that the cursor wasn't moving properly and it would be very distracting. I eventually switched to a cutting board type mouse pad made from high-density polyethylene (HDPE). I loved this mouse pad. HDPE is used in many products including products for food storage. With this mouse pad, I could glide my mouse along it easily and it provided a fairly slick surface with just enough traction on it. It worked great for doing office work or gaming. It was a game changer for me and I didn't think I could ever go back to traditional mouse pads. I had previously purchased something called an ultra-high molecular weight polyethylene (UHMW PE) board. It was 12" x 12" which was great and I thought it would work, but it was not good at all. It had a nice texture to glide the hands or fingers along, but it didn't work well for a mouse. The edges were also very sharp. I found another supplier who would make custom HDPE boards, but these were the type used for indoor skating rinks and it didn't work well as a mousing surface since there was too much drag. I finally found that the best surface would be from a cutting board made from HDPE. The previous one I had one was from a reputable company. The dimensions were okay, but it caused pain in my forearm near my wrist because of the dimensions. It was a 15" x 12" x 1" cutting board. I loved the look of it, but it was heavy and caused a pinch point on my forearm. I loved it, but it had to go. Finally, I ended up getting a custom board made which was 10" x 10" and it was 0.50" thick. It had rounded corners and all the edges were eased so that I wouldn't cut myself on the edges while running my finger along them or moving my wrists over them when mousing. It worked out surprisingly well. There was an option to get the edges cut or routered for a bullnose shape. I didn't opt for that. In retrospect, I would have purchased that extra option as it would have made the mouse pad cooler looking and reduce the sharpness about the edges even more so. My mouse glided along smoothly and effortlessly and the laser mouse tracked very well on the surface. The HDPE cutting board also provided just enough resistance or drag to make the mousing experience really comfortable. It was a game-changer for me and I don't think I could ever use any other type of mouse pad again. I used 3M Command hanging strips to keep the mouse in place on my desk. I went with the Cutting Board Company (Atlanta, Georgia).
Wrist Rest for Keyboard, High-Density Polyethylene (HDPE)
Stops Pain and Irritation in the Wrists and Forearms from Using a Keyboard
22
c900b15ad5e52a08d46f018e81786c41bdcf55f0db84c380755a6c459f4dc92e9188b53d24f7413da63ca69b560ba.jpg
9
magicskywhale
wrist-rest-for-keyboard-high-density-polyethylene-hdpe
c900b15ad5e52a08d46f018e81786c41bdcf55f0db84c380755a6c459f4dc92e9188b53d24f7413da63ca69b560ba.jpg
Wrist Rest for Keyboard, High-Density Polyethylene (HDPE)
My buddy and I were friends since grade school. We went to high school and were still friends. We didn't like much of our classes when we were in school. For the first two years, the only classes we were interested in were the computer and keyboarding classes. We had these large keyboards that had the main typing keys and then a bunch of other function buttons on the left side, along the top, and a number pad on the right-hand side. They were very clickety and very loud. It was a keyboarding class where the teacher was teaching us how to use the keyboard with proper finger positioning. After keyboarding class, we would have lunch and we would sit in the cafeteria and eat with our other friends. Sometimes, we would each grab a burger or a pizza slice from the cafeteria or we would bring our own lunch. A girl from my keyboarding class who I wasn't quite friends with approached me. I had bought a burger that day. She asked if she could take a bite since she was hungry and didn't have any money. I was caught off guard a bit, thinking this was probably a dare or a prank. My friends all turned and looked at me and I managed to stammer out, "Yeah, yeah, sure." Before I could even finish speaking, my hands had already ripped the burger in half and my arm was outstretched handing the half burger to her. She thanked me and took the half burger and sat down in front of me on the other side of the table and ate it as we chatted for a bit. I gave her some of my drink well. Over time, my friends and I eventually went our separate ways as we went off to various colleges and universities and the keyboard was still integral to our schooling and work. As the years passed, I would be doing a lot of work on keyboards. I would work at my desk and use my keyboard to write an essay, or a report, or to do some data entry and after awhile my wrists would start burning. Sometimes, there would be tingling along my forearms and along my fingers. The angle of my wrists when using a keyboard would mean that my wrists and forearms were placed at the sharp part of the desk. It would cause strain on my wrists and fingers and put pressure on my wrist and forearm area. I would try to fold up a small piece of cloth or a towel and use it as a makeshift wrist rest, but it wasn't ideal. I liked using this wrist rest at 16" x 3" x 0.75". It was a hard plastic, made of high-density polyethylene (HDPE) which was used in cutting boards, but still did its job very well and it was still very comfortable. I would normally have my wrists resting on the top of the wood desk. It would feel to be about the same hardness, but it was much more comfortable typing and using the keyboard with the wrist rest than without. The problem I had with it was that it slid around. It was very important to keep in one place because it just won't work with it sliding around and it could be very distracting. So what I did was I attached four pairs of the 3M Command hanging strips and used them to fasten the wrist rest to the desk and it stayed firmly in place. Before I put the fasteners in place, I would place the wrist rest on my desk and type for a bit and shift the wrist rest around until I found the perfect spot for it. Then I would place the fasteners on and set them in place. They finished curing after 24h and they would be good to go and lasted years. Other options would be to use a wooden wrist rest from a Japanese company called Filco where the wrist rests were made in Japan. These were excellent, but not my favorite. Aside from that, another option may be any of the gel versions that have a vinyl cover or a fabric cover or anything that had foam. I much preferred the HDPE wrist rest. I just loved the look of it and it was thicker than the offerings from Filco. Don't get me wrong, I still loved my Filcos. I loved the HDPE wrist rest and I actually preferred the feel of it over gel or the wood versions from Filco. I liked the wrist rest at a 0.75" thickness and I felt that 0.50" would also have worked. I liked the texture of the HDPE material over any of the other materials. Because it was made of HDPE, it was chemically resistant, so it had a soft glide sensation over its surface which added to the comfort when typing for a long period of time. I bought the wrist rest from the Cutting Board Company (Atlanta, Georgia).
Asimeto Engineer Machinist Square Stainless Steel with Bevel Edges
A Cool Paperweight to Keep Pages on my Desk and to Separate Projects
20
bad75200c8493c70a83d69bdd7d9e42e2c01b3d1a7be92421b3040f23cab2598ae7552ae58e70707206b5a19c3efc.jpg
6
magicskywhale
asimeto-engineer-machinist-square-stainless-steel-with-bevel-edges
bad75200c8493c70a83d69bdd7d9e42e2c01b3d1a7be92421b3040f23cab2598ae7552ae58e70707206b5a19c3efc.jpg
Asimeto Engineer Machinist Square Stainless Steel with Bevel Edges
When I was young, my mother took us kids on a plane trip overseas for a vacation. We arrived after a long flight and stayed with family. We saw various sights and visited many attractions and went to many different restaurants and sampled the local cuisine. It was a fun and exciting journey and I got to spend time with my mom. It was much hotter than being at home and quite a bit sunnier, but we eventually got used to it. It was nice meeting other family members for the first time. Love was a beacon coming from another part of the world. Before we knew it, several weeks had already passed and we had settled into a routine for our day-to-day that felt so natural that we were basically living in a home away from home. It was time for us to head back to our true home. We had picked out some things to take as souvenirs for our trip home. My mother bought me a pear sculpture made of crystal. It looked like it was clear glass and it had neutral coloring and it had bubbles inside it to add some texture. It was flat at the bottom so that it could stand upright and was about the size of my hand. I thought it was a cool piece of artwork, so I kept it as a paperweight. Years later, I worked on some projects that required various tools and measuring devices. I would work with measuring devices called squares that helped with ensuring that two parts were perpendicular to each other. I liked this particular device because it was one single piece with nothing else added or attached to it. I bought the Asimeto Machinist/Engineer Square with a 4-inch blade (639-23-0). I liked having this square because it was very well-made. It had a DIN 875 standard at precision 00 (zero-zero) which had the lowest maximum variation for perpendicularity compared with the other precision levels. The tolerance levels were into the microns. I liked this aspect of the square and the fact that it referenced a standard of tolerance for deviation or variance and to me this meant that it was much more special when it was used as a paperweight. It had improved my life by serving as a high-quality and unique paperweight. Most things that are around the size of one's palm with a bit of heft to it could serve as a paperweight. I liked using this as a paperweight because it was not just some generic weighted object, but it had an alternate purpose to it as well. It could be used to check something for squareness or perpendicularity. Everytime I looked at it I was reminded that it wasn't merely a paperweight, but it was something that was built to a high-level of precision down to the micron. I also liked the look of it, it was different from other machinest/engineer squares because one length, the blade edge, had beveled edges at the outer edge and inner edge. Also, most squares were made of regular or hardened steel. This one was made of stainless steel so that it was more resistant to rust and corrosion. While it sat on my desk as a paperweight, it wouldn't rust or corrode. It also wouldn't crack or shatter if dropped or knocked off my desk accidentally like a glass or crystal paperweight would. You can see other machinist squares with a lot of use and they have a corroded surface from use. This Asimeto square will continue to look like a nice and beautiful piece free from corrosion over time because it was made of stainless steel. Because it was a couple of millimeters thick, it can lay mostly flat. It was different from a glass pear sculpture paperweight in that it could serve as a paperweight, but with the additional ability to allow someone to stack additional papers ontop of it if needed. This meant that you could use it as a page divider with pages laying flat if you were working on various projects. Some pages that belonged to another project or file you were working on could be held down by the paperweight and then other pages belonging to other projects or files could be placed on top thereby separating the projects. Overall, I am glad that I bought this Asimeto Machinist/Engineer Square. I have it on my desk everyday and it is useful to me to keep paper and pages on my desk where they are less likely to be pushed off or blown off my desk. It is a nicely made product that makes my desk a little nicer and a bit cooler as a result of having it there. This square belongs to the 639 series and comes in larger and smaller sizes. I like the 4-inch version, but I feel that the one that is one step up in size would be good too.
Ohuhu Ocean Wave Night Light Projector
Soothing and Relaxing Lamp That Generates Ripples and Wave-like Patterns Like a Lake or Ocean
13
e54d0fdf210846f713959af5ff575c790e120568053af79a7120fe4daeaa82da45ceefa5e1cafce52683411b0d244.jpg
6
magicskywhale
ohuhu-ocean-wave-night-light-projector
e54d0fdf210846f713959af5ff575c790e120568053af79a7120fe4daeaa82da45ceefa5e1cafce52683411b0d244.jpg
Ohuhu Ocean Wave Night Light Projector
When we were young, my mother would work a lot. She would work a lot of hours each day and and she would rarely take a day off. She did whatever she could to help provide for our family. It would always be a wonderful experience whenever our mother had time to spend with us, between working heavy hours and running errands. We would help out whenever we could, but we were still quite young. One time, our mother took us out for a drive. We stopped by a convenience store to pick up some food and we headed further south towards the lake. Our mother took us to an area where there were ducks and we brought the food over and we threw the food out onto the water for the ducks to get. The ducks would make some ripples and some splashes in the water when they went to get the food. We went to another area where there were Canadian Geese and we fed them as well. Afterwards, we went out to a modest restaurant in the area. We had all sat down to eat and I remembered it was very warm out, but the restaurant was air-conditioned so it was a nice feeling walking into a cold building from being outside in the hot weather. We had a nice meal and then went home. The lake and the area near the lake changed. There was more construction and the city built a multi-use path and a boardwalk near the lake. Years later, it would be my wife and I visiting the lake. We didn't feed the ducks, but we would just walk around the multi-use path and the boardwalk by the water. We had visited during the summer when it was really hot and also when it was cooler. It was nice to be near the water. I love this Ohuhu LED projector. I would have it on the nightstand next to the bed and have it run. It generates audio effects like crickets or seagulls on the ocean. I prefer using it with the sound effects off and using the full-mode for the color setting which is all the colors running simultaneously. Sometimes, I like to use just the blue and red setting. This projector/lamp has improved my life because it provides a soothing sensation kinda like if I was on the water. I have it pointing up towards the ceiling and I can just lay in bed and look up at the ripple and wave light pattern that this projector generates, but with the room lights turned off. My mind sometimes drifts away and I feel relaxed and a lot of my stresses and worries melt away.
BlissLights Sky Lite, LED Laser Star Projector and Nebula Lamp
My Own Personal Laser Light Show to Relieve Stress
11
3566331f4dd0e18678aef0b1d838b273c858e23114572452abb93f23c9acc6a6e2661fb3f2e90ffa5d6e8505c517b.jpg
10
magicskywhale
blisslights-sky-lite-led-laser-star-projector-and-nebula-lamp
3566331f4dd0e18678aef0b1d838b273c858e23114572452abb93f23c9acc6a6e2661fb3f2e90ffa5d6e8505c517b.jpg
BlissLights Sky Lite, LED Laser Star Projector and Nebula Lamp
When I was younger, my brother used to have friends over and they would smoke and party. He would smoke too. I thought he would smoke just to fit in with his friends, but there were many times he would just hang out outside in the backyard and smoke. I didn't like it. I didn't like the smell and I thought it was an unhealthy habit. Despite this, my brother was still more athletic than me. Our family went out one time to an amusement park a decent drive away, but not too far. We got to the parking lot and went in. There were some water attractions since this place was on the lake. I liked some cool attractions, but they were further at the other end of the park. We walked over to the end and we went to the part with the laser light show. It was really neat. You got to sit down in comfy movie theatre-like seats and you got to see a laser light show with what appeared to be holographic projections. It was all really neat. The show was probably 20 minutes long, but it felt longer and it was amazing the entire time. They had some interesting soothing and entertaining music and musical effects and made the whole experience magical and surreal. Afterwards, we went into the nearby maze attraction. The maze has multiple parts, kinda like a friendly fun house where you progress through different themes. They would be different mazes made of different materials and joined together so that you progressed through one after the other in sequence. For instance, one part was just walls, painted drywall and then you got to the end of that maze and progressed further into one that was a hedge maze separated by plants/hedges. When you completed that maze, you left into another maze where the maze walls were made of wire, but thick-coated so that people wouldn't get hurt. This was not the same as another part of the amusement park with hanging soft punching bags. This was the maze sequence part. About half of the way in the maze attraction, there would be a darkened maze with low-light. It had really interesting and soothing, but magical music. There would be a smoke maker and there would be lasers pointing to near the ceiling with colorful background lighting. This was my favorite part of the maze. I would stay there for as long as possible whenever my family went to this park. When I finished running through the maze, I can get a score to see how long I took and if I hit the certain checkpoints. I had a card and there would be card readers at various points. I would always seem to miss one or two checkpoints. Before we left to eat or left the park altogether, we would go on a boat ride. It would be like a roller coaster, but instead of following a metal track it would follow a water path with a plastic waterway filled with water and we would be sitting in a boat running along the watercourse. It was somewhat like a water slide, but the small boat we were in would drift gently along the watercourse. We would seat four to six per boat and go along. There would be decorations and animatronics all along on either side of the watercourse for entertainment and then a part that raises the boat up a path uphill before it comes to flat area and then a downward direction like a roller coaster but all on water. The final splash part is where people raise their arms and scream. I did this ride a few times and I ended up getting a lot of water in my mouth during the drop and splash part. I went home and shortly afterwards, I kept coughing and coughing. I ended up getting sick and it was most likely from the water I got in my mouth. I kept coughing through the night and for the next few days. My face was red and I was congested and didn't sleep well. I looked like a mess. My brother, whose room was next to mine, kept going to my room to check on me to make sure I was alright. He was still smoking at the time. Then suddenly, he stopped smoking and he stopped inviting friends over. He thought that I was having a reaction to the smoking. It was a cool trip going to that amusement park and neat that I got sick and my brother quit smoking because of it. I picked up a Blisslights Sky Lite projector and it reminds me a lot of the laser light show I used to go to as a kid at that amusement park and the laser part/new age music part of the maze attraction. The Blisslights Sky Lite projector generates a blue nebula background that you project onto a wall or ceiling with a stars mode which are green stars generated by a lasers. The stars and nebula can be kept stationary or moving slowly by hitting the second button on the projector. There is a third button closed to the floor which you can use to adjust the brightness. You can leave it on to fall asleep to as there is a six hour auto shut-off built into it. You also have the option of showing just the blue nebula background, just the green laser stars, or both turned on simultaneously. The Blisslights Sky Lite projector improved my life because it creates another form of stress-relief. I can just lay in bed and look at the laser light show and it feels like laying on the grass and looking up at the stars on a clear night. The laser lights can move slowly with the nebula moving kinda like if you were on a planet moving and looking up at the night sky. It kinda makes you forget where you are and you are left with just you and the stars. It's a type of surreal experience that can take you way from your worries and stresses, if only temporarily.
Lifehammer Window Tool and Seatbelt Cutter
An Essential Safety Device to Keep In Your Car in Case of Emergency
5
3e177b18ac65b74beaa3459f5cb39cc2487bfab854b6bc75b44962ec3ddff1a1ab36aff11366a37f6b226d57c3aec.jpg
8
magicskywhale
lifehammer-window-tool-and-seatbelt-cutter
3e177b18ac65b74beaa3459f5cb39cc2487bfab854b6bc75b44962ec3ddff1a1ab36aff11366a37f6b226d57c3aec.jpg
Lifehammer Window Tool and Seatbelt Cutter
When growing up, I didn't think my uncle was a mean man. He lived a tough life and really didn't have any handouts, but he had to stay strong to provide for his family. A part of that probably made him seem a little rough around the edges, maybe a little stern, and a bit on the intense side, but he was a decent man. I try to think back, but I never saw the man smile. Despite this, I could tell that there was some kindness to him. I went away to school and hadn't seen my uncle in some years. At some point, I needed help, it was a tough situation and one in which I didn't feel I could get out of. I asked for help and my uncle came out to help me. It wasn't a lot to sacrifice for him, but it nonetheless was a huge help to me. I was going to be in a world of hurt if it wasn't for my uncle. Years later, my uncle was dying in a hospital with health complications related to old age and a bad lifestyle. He was frail as he lay in his hospital bed. I sat at a chair by the foot of his bed. I had just come from a job interview. I said goodbye to him and thanked him for helping me when no one else in my family could. He passed away not long after I visited him. Life is fragile and can disappear easily. I think about this from time to time while in a car. Sometimes, cars can be really sturdy and have lot of safety features. They are not fail-safe and people can still be seriously hurt in a car accident. If there's ever an instance when a person is trapped in the car, but needs to get out, it is important to have the proper tools for safe egress. I always have two of these Lifehammers in the car. I like to keep one in the driver's right arm console and one behind the passenger seat. It is useful in case of an accident and the seat belt mechanism is damaged or won't release the seatbelt. In the event that the car door is damaged, it is useful to break the window to get out of the vehicle.
Vornado 133DC Compact Fan with variable speed control
Prevents Me From Getting Overheated While Working at My Desk
4
8b77cd8ae46c61d183f0d5b22203f562468f9cbebd4bc939ee79de8f347e3e701c5078700d7940f03776f7d5cd1c5.jpg
7
magicskywhale
vornado-133dc-compact-fan-with-variable-speed-control
8b77cd8ae46c61d183f0d5b22203f562468f9cbebd4bc939ee79de8f347e3e701c5078700d7940f03776f7d5cd1c5.jpg
Vornado 133DC Compact Fan with variable speed control
A long time ago, my sister-in-law bought my wife and I some food to eat. We didn't have a lot of money at the time and we were really grateful. Sometimes, the little things could mean so much. We were just happy that we weren't having dry ramen again that night. Some years later, I had finished my schooling and began working. I worked hard and tried to stay consistent. I wasn't well off, but I was somewhat comfortable at that point. My sister-in-law was in an abusive relationship. She needed help and reached out to us. We helped her out and got her moved into a new apartment. The apartment was really hot and I had a large fan that had its own stand and it had something like 16 to 20 different fan speeds. It was a nice fan and it had an ultra low mode that could still keep you cool, but without being too strong or too loud. I used to use it for work and kept it near my desk whenever it got a little hot in my room or if I was working while moving around a lot and worked up a sweat. My sister-in-law needed it more and I was happy to give her the fan since she was having issues with her air conditioning. I eventually picked up a small, personal fan. I bought a Vornado DC133 and I keep it on my desk. Sometimes, I get overheated and need to cool down quickly. This fan has improved my life by allowing me to rapidly cool down whenever I need just by turning the dial. I would normally just turn the fan on by turning the dial a little bit and it would be in low mode which was usually enough. There have only been a few times when I have to turn up the intensity and there is a bit more noise, but the fan is still pretty quiet.